First things first: this is not a  reincarnation of the DN-01, Honda’s overpriced, oddly styled scooter  experiment. What you’re looking at is the 2014 Honda CTX700 and CTX700N,  the latter of which, at the right angle, reminded me of a poor man’s  Ducati Diavel when I first laid eyes on it during its unveiling at the  Chicago International Motorcycle Show last Friday. Short for Comfort,  Technology and Experience, Honda’s hoping the CTX will lure new and  re-entry riders into the moto world.
Two versions were unveiled in Chicago, the standard CTX700N ($6999),  and the CTX700 ($7799), the latter with a bikini fairing separating it  from the naked variant. Both share the same frame and 670cc  parallel-Twin with the NC700X, and are also available with ABS and  Honda’s second generation DCT (Dual Clutch Transmission) for just a  grand more, though the two options can’t be separated.

Both are world models, meaning they will be  built to the same specification regardless which market they’re sold in.  Combine this with the shared cost of engine development with the Honda  Fit automobile, cross-pollination of parts between various models, and  production in Thailand, and the result is a motorcycle able to bring DCT  technology to the masses for well under $10,000.
   Look  carefully at the single brake rotors at each end of the CTX. Each disc  comes from the same single casting, with the inner then cut out. The  larger, 320mm disc, sits in front, while the smaller 240mm rotor goes  rearward. A clever cost-saving measure by Honda.
Look  carefully at the single brake rotors at each end of the CTX. Each disc  comes from the same single casting, with the inner then cut out. The  larger, 320mm disc, sits in front, while the smaller 240mm rotor goes  rearward. A clever cost-saving measure by Honda. Honda  is hoping the modest cost of admission will light a fire in the  proverbial arse of an industry “that’s been a little stale lately,” says  Bill Savino, Honda Powersports Press Manager. And while the engine and  much of the technology is the same as the NC700X, the obvious difference  comes in the CTX’s styling and intent. 
With its feet-forward design, pulled back handlebars and low  28.3-inch seat height, the cruiser-esque CTX, “is going after new  riders, or people who've been away from the market for awhile,” Savino  says. Meanwhile, the CTX700, complete with accessory saddlebags and tall  windscreen, is ideal for “that touring customer who's been riding a  Gold Wing for 20 years and may want to downsize to something more  manageable.” 
 Either way, with the available DCT package and its ability to change  gears automatically or at the push of a button, Savino hopes “this will  reduce any anxiety someone may have about shifting.” Despite the  engine’s forward slant in the frame, the CTX’s 3.17-gallon fuel tank is  located in the traditional location, as opposed to the NC700X which  places the fuel under the seat.
 As such, the CTX doesn’t enjoy the same convenient storage  compartment as the NC. In fact, without the accessory saddlebags,  there’s not much storage space at all. 
 |  The  CTX700 series shares the same frame and 670cc engine as the NC700X.  Despite the forward slant of the engine, however, fuel for the CTX is in  the traditional location. Note also the lack of a shift lever. Both the  CTX700 and 700N are available with either DCT or standard  transmissions. | 
To help keep costs down, suspension consists of a traditional 41mm  fork and single shock. Neither are adjustable. Rake is a little lazier  than the NC700X at 27.7 degrees (vs. 27.0 degrees), while trail is  nearly identical at 4.4 inches, 0.1-inch more than the NC. 
 Sitting on the CTX, the low seat height is extremely inviting and  non-intimidating. Ergonomics feel very cruiser-like, with the hand  controls placed directly in front of the rider. Reach to the pegs is  natural too, even for my stubby 30-inch inseam. The seat is broad and  the cockpit roomy, meaning riders of various body types should find  their comfort zone quickly and easily on the CTX. 
  The  view from the saddle reveals upswept handlebars ready to greet the  rider, along with mirrors that appear to be well spaced and thought out.  Also notice the optional tall windscreen and the handlebar controls for  the DCT.
The  view from the saddle reveals upswept handlebars ready to greet the  rider, along with mirrors that appear to be well spaced and thought out.  Also notice the optional tall windscreen and the handlebar controls for  the DCT.Both bikes feel  relatively narrow and carry their weight low, but the display bikes were  sans fuel, so we’ll save judgments on weight and agility until we get  to ride one. Still, curb weights start at 478 pounds for the standard  CTX700N, with DCT/ABS adding 28 pounds. Weights for the semi-faired  model were not available as of press time.
Seeing as the NC and CTX platforms are adaptable and can be  repurposed into several iterations, Savino admits the possibilities for  the NC and CTX platforms are virtually endless. “There could be bigger  or smaller versions with different displacements or engine  configurations to meet demand or certain markets.” 
 Speaking of the CTX700 specifically, “these are just two of the first  models of CTX. There will be more products in the future.” He refused  to elaborate but mentioned the long-in-the-tooth ST1300 sport tourer as a  model worthy of a successor from the CTX family. “There’s a lot of  different ways this series can go.” 
 |  Fully  kitted with accessory saddlebags, tall windscreen, passenger backrest  and heated grips, the CTX700 should make for a competent, comfortable  and relatively affordable tourer. | 
Along with the NC700X and CB500 series of motorcycles, the CTX line,  which is due in dealers by Spring 2013, is poised to be one of a number  of reliable, inexpensive models forthcoming from Honda. “The 2014 model  year is going to be exciting for us, as we’ll be introducing even more  new products,” says Savino.
 
0 nhận xét:
Đăng nhận xét